We offer a variety of Perkins and Cat shop manuals in digital PDF format. See the links below:
Case 621D Loader Serial Number Location, Fluid Capacities
Serial Number / PIN location
Fluid Capacities
Engine Oil
Capacity with Filter Change – 15.1 litres (16 U.S. quarts)
Type of oil – Case No. 1 engine oil
Engine Cooling System
Capacity – 36 litres (38 U.S. quarts)
Type of Coolant – Ethylene glycol and water mixed for lowest ambient temperature (at least 50/50 mix)
Fuel Tank
Capacity – 189 litres (50 U.S. gallons)
Type of Fuel – No. 2 diesel fuel
Hydraulic System
Hydraulic Reservoir Refill Capacity with Filter Change – 68.5 litres (72 U.S. quarts)
Total System Capacity – 113.6 litres (30 gallons)
Type of Oil – MS-1209 Hy-Tran Ultra
Transmission
Refill Capacity with Filter Change – 19.9 litres (21 U.S. quarts)
Total System Capacity – 27.7 litres (29.25 U.S. quarts)
Type of Oil – MS-1209 Hy-Tran Ultra
Axles
Capacity
Front – 22.7 litres (24 quarts)
Rear – 24.6 litres (26 quarts)
Type of Lubricant – SAE 80W140
Brake System
Type of Fluid (Same as Hydraulic System) – MS-1209 Hy-Tran Ultra
Conversion
Imperial quart= litres x 0.879877
Imperial gallons= litres x 0.219969
For more Case 621D wheel loader specifications, service information and wiring diagrams, we highly recommend the following manuals:
Case 821B Loader Serial Number Location, Fluid Capacities
Serial Number / PIN location
Fluid Capacities
Oil Capacity (with Filter Change) – 22 U.S. Quarts (20.9 L)
Oil Level Check – Every 10 Hours of Operation or One Time Each Day
Oil Change and Filter Replacement Interval – Every 250 Hours of Operation
Cooling System Capacity – 34 U.S. Quarts (32.2 L)
Coolant Reservoir Fluid Level Check Interval – Every 10 Hours of Operation
Radiator Fluid Level Check Interval – Every 250 Hours of Operation
Cooling System Change Interval – Every 2000 Hours of Operation or One Time Each Year
Cooling System Filter Replacement Interval – Every 250 Hours of Operation and Each Time the Cooling System is Drained, Flushed and/or Refilled
Fuel Tank Capacity – 72 U.S. Gallons (272.7 L)
Hydraulic Reservoir Refill Capacity – 40 U.S. Gallons (150.2 L)
Total System Capacity – 46.0 U.S. Gallons (174.2 L)
Transmission Refill Capacity (with Filter Change) – 3.25 U.S. Gallons (12.3 L)
Front and Rear Axle Refill Capacity
Center Bowl Front – 20 U.S. Quarts (18.9 L)
Limited Slip Additive (Front Bowl) – 2.0 U.S. Quarts (1.9 L )
Center Bowl Rear – 14.5 U.S. Quarts (13.7 L)
Limited Slip Additive (Rear Bowl) – 1.5 U.S. Quart (1.4 L)
Front Planetary Ends (Each) – 6.5 U.S. Quarts (6.2 L)
Rear Planetary Ends (Each) – 6 U.S. Quarts (5.7 L)
For more Case 821B wheel loader specifications, service information and wiring diagrams, we highly recommend the following manuals:
New Holland TV145 Tractor Fluid Capacities and Serial Number Location
TV145
Fluid Capacities
Engine
Oil Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAE 15W–40 Ambra Mastergold HSP
Oil Capacity – with filter . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.0 L (23 qts. U.S.)
Cooling System
Coolant Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50/50 Blend of water and antifreeze (NH900A)
Coolant Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.0 L (18 qts. U.S.)
Hydraulic System Reservoir
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45.5 L (12 gal. U.S.)
Oil Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ambra Multi G 134 or Ambra MasterTran SSL All Season
Front Axle
Oil Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ambra Multi G 134
Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.0 L (18 qts. U.S.)
Fuel
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 L (55 gal. U.S.)
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAE ASTM EN590 Grade 2D
Brake Fluid
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mineral Based Only (New Holland 86541699 DS)
All Grease Fittings
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ambra GR–9 Multi–Purpose Grease
Serial Number Location
The vehicle identification plate (1) is located on the lower left front corner of the cab.
The engine serial number is stamped on a flat boss area on the right side of the engine block below the starter and to the rear of the block, just above the oil pan. The engine identification information is located on a tag on the right side of the engine rocker cover.
For more New Holland TV145 tractor specifications, service information and wiring diagrams, we highly recommend the following manuals:
- New Holland TV145 Tractor Shop/Service Manual (All Years)
- New Holland TV145 Tractor Operator’s Manual (All Years)
Case IH 9370, 9380, 9390 Tractor Fluid Capacities and Serial Number Location
Fluid Capacities
ENGINE
Crankcase Capacity (with filter) 11 U.S. gallons ( 41.5 L)
Oil Type Case No. 1 Multi-Viscosity Engine Oil
Cooling System Capacity
(PIN JEE0036000 and before) 17.5 U.S. gallons (66.0 L}
(PIN JEE0036001 and after) 18.3 U.S. gallons (69.0 L}
Fluid Type 50 Percent Ethylene Glycol and Water
AXLE (each)
Oil Capacity (total) 9.0 U.S. gallons (34.0 L}
Oil Type Case Hy-Tran Plus
TRANSMISSION (PowerShift)
Oil Capacity (with filter and PTO) 10.5 U.S. gallons (39.7 L)
(w/o PTO) 10.0 U.S. gallons (37.8 L)
Oil Type Case Hy-Tran Plus
TRANSMISSION (HM-2, HM-24 SynchroShift)
Oil Capacity (with filter and PTO) 12.5 U.S. gallons (47.3 L)
(w/o PTO) 12.0 U.S. gallons (45.4 L)
Oil Type Case Hy-Tran Plus
HYDRAULIC SYSTEM
Reservoir Capacity (with filter) 18.0 U.S. gallons (68.0 L}
Oil Type Case Hy-Tran Plus
PTO DROP BOX
Oil Capacity Transmission supplied
Oil Type Case Hy-Tran Plus
BRAKE SYSTEM
Reservoir Capacity 1 U.S. quart (0.946 L)
Brake Fluid Type SAE J1703 (DOT 3)
FUEL SYSTEM
Tank Capacity 270 U.S. gallons (1022.0 L}
Fuel Type No. 2D
Serial Number Location
For more Case IH 9370, 9380, 9390 tractor specifications, service information and wiring diagrams, we highly recommend the following manuals:
- Case IH 9370, 9380, 9390 Wheel/Quadtrac Tractor Service Manual (All)
- Case IH 9370, 9380, 9390 Tractor Operator’s Manual (Wheeled/Cummins N14)
New Holland LS25, LS34, LS45, LS55 Yard Tractor Specs and Serial Number Location
Basic Specifications
LS 25 YARD TRACTOR
MODEL 9861897
ENGINE Model CV12.5S Kohler Command 12.5
12.5 H.P.@ 3600 RPM
398cc Displacement
WEIGHT
Net: 521 lbs.
LUBE FITTINGS
Wheel Spindles: 2
Front Wheels: 2
Axle Pivot: 1
Clutch Pedal: 1
Brake Pedal: 1
LS 35 YARD TRACTOR
MODEL 9861898
ENGINE Model CV14S Kohler Command 14
14.0 H.P.@ 3600 RPM
398cc Displacement
WEIGHT
Net: 510 lbs.
LUBE FITTINGS
Wheel Spindles: 2
Front Wheels: 2
Axle Pivot: 1
Hydro Pedal: 1
LS 45 YARD TRACTOR
MODEL 9861899
ENGINE Model CV16S Kohler Command 16 16.0 H.P. @ 3600 RPM
624cc Displacement
WEIGHT
Net: 605 lbs.
LUBE FITTINGS
Wheel Spindles: 2
Front Wheels: 2
Axle Pivot: 1
Clutch Pedal: 1
Brake Pedal: 1
LS 55 YARD TRACTOR
MODELS 9861901/9862543 with Cruise Control
ENGINE Model CV1 SS Kohler Command 18
18.0 H.P. @ 3600 RPM
624cc Displacement
WEIGHT
Net: 510 lbs.
LUBE FITTINGS
Wheel Spindles: 2
Front Wheels: 2
Axle Pivot: 1
Hydro Pedal: 1
Serial Number Location
Serial numbers for all LS series tractors are located on the tender pan beneath the seat. The serial numbers are coded to indicate pertinent data.
Manuals
For more detailed specifications, service information and wiring diagrams we highly recommend the following manuals:
- Ford/New Holland LS25, LS35, LS45, LS55 Tractor Service Manual
- Ford/New Holland LS25, LS35, LS45, LS55 Parts Manual – Available By Request (contact us)
- Ford/New Holland LS25, LS35, LS45, LS55 Operator’s Manual – Available By Request (contact us)
- Mower Attachment Operator’s Manuals – Available By Request (contact us)
New Holland L865, LX865, LX885, LX985 Skid Steer Specs and Serial Number Location
Basic Specifications:
MODEL L865, Lx865, Lx885
ENGINE MODEL 332T Non-emissionized
L865 – 850651 to 999999 and 0001 to 931119
Lx865 – 850652 to 999999 and 0001 to 99422
Lx885 – 864901 to 999999 and 0001 to 113970
MODEL 332T/JF Emissionized
L865 – 93120 to 850650
Lx865 – 99423 to 850651
Lx885 – 113971 to 864900
CYLINDERS 3
ASPIRATION TURBOCHARGED
CYCLE 4 Stroke
BORE AND STROKE 4.4″ X 4.2″(112×106.7)
DISPLACEMENT 192 cu.in. (3.15L)
COMPRESSION RATIO 17.5 to 1
SPEEDS
-FAST (no load) 2225 to 2275 RPM
-IDLE (no load) 1000 to 1050 RPM
HORSEPOWER
(GROSS)MFG rating 67 @2200 RPM
SAE NET) 60 @ 2100 RPM
TORQUE (Mfg, rating) Gross 184.5 ft. lbs. (250 N·m) @ 1400RPM
CAPACITIES
Cooling system 16 qt.(15.1L)
Engine crankcase w/filter 7 qt. (6.6L)
Fuel tank 18.8 Gal. (71.2 L)
Hydraulic system 6.5 Gal.(25.5L)
Engine gearbox 1.5 qt. (1.4L)
Final drive gearbox (ea.) 3.8 qt. (3.6L)
Chain case (final drive ea.) 2 Gal. (7.6L)
Common gearbox and final drive chain case (ea.) 11.8 qt. (11.2L)
MODEL Lx985
ENGINE MODEL 450/NC Emissionized
CYLINDERS 4
ASPIRATION NATURAL
CYCLE 4 Stroke
BORE AND STROKE 4.4″ X 5.0″ (112×127)
DISPLACEMENT 304 cu.in. (SL)
COMPRESSION RATIO 17.5to1
SPEEDS
-FAST (no load) 2325 to 2375 RPM
-IDLE (no load) 1000 to 1050 RPM
HORSEPOWER
(GROSS)MFG rating 83 @ 2200 RPM
(SAE NET) 75 @ 2200 RPM
TORQUE (Mfg, rating) Gross 245 ft. lbs. (332 N·m) @1300 RPM
CAPACITIES
Cooling system 16 qt.(15.1 L)
Engine crankcase w/filter 3.6 gal. (13.6 L)
Fuel tank 18.8 gal.(71.2 L)
Hydraulic system 10.25 gal.(38.8 L)
Engine gearbox 1.5 qt. (1.4 L)
Common gearbox and final drive chain case (ea.) 12 qt. (11.2 L)
Serial number location:
For comprehensive service and maintenance information, we highly recommend the following manuals:
Freightliner XC RV Chassis VIN Decoder
In 1996, Freightliner acquired the Oshkosh (previously John Deere) X-Line chassis. They are currently sold under the Freightliner name and used by coach builders such as Fleetwood and Winnebago.
Under the Freightliner brand, all XC, XCF, XCL, XCM, XCP, XCR, XCS chassis VINs begin with 4UZ. Generic VIN decoding websites do not give much insight into the particular configuration of the RV chassis, however Freightliner supplies convenient decoding charts, viewable below (click page up/down button to navigate)
VIN decoding chart for models built before April 30th, 2000:
before-apr-30-2000-VIN-decoderVIN decoding chart for models built May 1st, 2000 and later:
FTL-RV-may-2000-up-VIN-decoderFor DIY service and maintenance information on the 1996+ Freightliner XC chassis, we highly recommend the workshop manual. We also carry corresponding Cummins, Cat and Detroit engine manuals.
Flame Start System in Cummins C8.3 Engines
Customer Terry M. contacted us regarding the omission of information on the flame start system (intake heater) in the Cummins C8.3 engine service manual. While most C series engines are equipped with a grid/wafer style electric heater, some are equipped with an open flame type heater, which uses diesel fuel and a spark plug to preheat the intake before starting. Terry was able to locate a service bulletin in Cummins archives which is attached below (PDF). This bulletin provides general information, inspection, removal and installation procedures.
SPT01T10-2The flame start system is available on the C Series automotive engines only with either a 12-VDC or 24-VDC electrical system.
The flame start system burns a small amount of diesel fuel in the intake manifold to aid starting in cold ambient temperature conditions. The system also operates in a post-start mode to reduce white smoke.
The intake cold-start control module monitors engine temperature. When the engine temperature is greater than 7°C (45°F], the flame start system will not be activated. Below 7°C (45°F], the system will operate as follows:Preheat Cycle
When the engine temperature is below 7°C [45°F], turn the ignition key to the RUN position. When the key is in this position, the WAIT-TO-START lamp will illuminate for approximately 25 seconds. The engine should not be cranked until the WAIT-TO-START lamp shuts off. If the engine is cranked before the preheat cycle is complete, the process is aborted. The controller is reset each time the ignition is turned off.Engine-Starting Cycle
When the WAIT-TO-START lamp goes out, the preheat cycle is complete. Depress the accelerator pedal all the way to the floor and crank the engine. The engine must be cranked within 30 seconds. If the engine is not cranked within 30 seconds, the preheat cycle needs to be repeated (step 1 ).Post-heat Cycle
Cummins Inc.
Post-heating occurs as the flame plugs continue to burn while the engine is running. Post-heating helps warm the engine faster and eliminates white smoke. Post-heating times are determined by the engine temperature upon start-up.